“The aircraft need be overhauled.” Bell 1995 Aircraft with TOTAL TIME 1.871H, year 1995.This.



Item specifics Condition: Seller Notes:
Used
“The aircraft need be overhauled.”
Make:

Bell

 Model Year:

1995

Aircraft with TOTAL TIME 1.871H, year 1995.This helicopter have a incident when starting, and the maiin rotor blades strike the hangar door. Have airframe and blades dammaged. Airframe rebuild in our facilities, and all parts damaged will be changed, ex:
MAIN ROTOR GEARBOX - OHTAIL ROTOR GEARBOX - OHENGINE - OH
The aircraft interior will be rebuild with new materials!
To overhaul the aircraft will need the parts below and new MAIN ROTOR BLADES. The engine will need CASE COMPRESSOR and some minor parts, the total amount of parts will be closer than Us$ 250.000,00.
We can sell this aircraft by the amount of Us$ 280.000, 00 in this condition!
See below the parts that the aircraft needs to rebuild:
AN5813-1 pitot tube 1
50-012-19N400 union assy 1
206-075-634-001 tube assy 1
206-040-385-109 Shaft Assy 4
206-040-931-103 Shaft Assy 1
206-040-383-101 Shaft Assy 1
32721-1 Disc Assy 7
206-040-339-103 Bearing *5
AS5406W08 adapter 1
NAS1149D1290J washer 1
AS5178D08 nut 1
206-062-672-001 tube assy, fuel vent 1
206-061-660-103 hose 1
206-062-690-101 tube assy 1
AS1038J0606 elbow 1
NAS1149D0916J washer 1
AS5178-06 nut 1
206-061-634-107 hose 1
206-073-913-003 blower 2
NAS5211-24-9 coupling 1
206-070-936-001 flapper assy, lh 1
206-070-936-002 flapper assy, rh 1
MS35489-2 grommet 1
206-070-937-013 plenum assy, lh 1
206-070-937-015 plenum assy, rh 1
FIGURE 29-01: HYDRAULIC SYSTEM INSTALLATION
PN Descrição Unidade
70-053F000D154A Hose assy, hyd.pressure 1
70-061G000Y162A Hose assy, hyd.return 1
FIGURE 29-03
PN Descrição Unidade
156005-6D0202 Hose assy 1
70-061H000A180A Hose assy 1
206-076-390-001 Tube assy 1
206-031-165-001 Support 1
206-076-172-001 gasket 1
206-076-388-001 Tube assy 1
206-076-363-001 Tube assy 1
FIGURE 29-05 Pump and regulator
PN Descrição Unidade
206-076-016-101 Pump and regulator (kit) 1
FIGURE 76-6: CONTROL INSTALATION, DROOP COMPENSATOR
PN Descrição Unidade
206-062-708-005 TUBE ASSY 1
206-062-707-001 DOWEL 2
AN173-7 BOLT 2
120-037E20-8 SHIM 1
AN3-5A BOLT 2
206-062-716-001 BRACKET ASSY, OUTBORD 1
AN3-4A BOLT 2
AN173-10 BOLT 1
206-062-711-001 RETAINER ASSY 1
209-060-754-001 BOOT ASSY 1
206-062-715-001 SUPPORT ASSY 2
AN173-10 BOLT 2
AN173-12 BOLT 1
Figure 71.2 - Screen instalation, cow induction, fwd
PN Descrição Unidades
206-061-250-001 channel assy 1
206-061-224-035 screen assy 1
ms27039-1-07 screw 4
206-061-224-017 seal 2
206-061-224-037 floor assy 1
206-061-251-001 clip assy 1
Figure 63.1 - Driveshaft assembly and instalation, transmission
PN Descrição Unidades
M2742630181B ring, retainer 4
AS3209-235 packing, preformed 4
206-040-102-103 plate 2
6000-1 temp-plate red border (370 deg f) 4
6000-3 temp-plate yellow border whith black stripes (330 deg f) 4
206-040-117-003 coupling spherical 2
206-040-272-101 seal assy 2
206-040-106-001 spring 2
9440904 disk 1
206-706-114-001 ring 1
AN4-6A bolt 8
Figure 63.11 - Freewheel assembly and instalation
PN Descrição Unidades
AS3209-237 packing 1
A33209-215 packing 1
AS5174W0505 union 1
AS3208-05 packing 1
206-040-229-001 Gasket 1
206-040-208-001 shim 2
M2742630146D retainer ring 1
AS3209-141 packing 1
206-040-230-017 support assy (kit) 1
Figure 65-4 Driveshaft instalation
PN Descrição Unidade
206-040-301-101 driveshaft instalation t/r 1
Figure 64-2 Tail rotor instalation
PN Descrição Unidade
206-010-777-001 Bumper 1
206-011-715-001 shim 2
120-006C38-29 shim 10
206-011-725-001 rod assy 1
nas6604d116 / 20-057-4-16d bolt 1
an970-4 washer 1
nas6604d22 / 20-057-4-22d bolt 1
an960c416/nas1149c043r washer 1
an960c416L / nas1149c0432r washer 1
206-010-762-001 washer lock 1
Figure 64-3 Hub and blade assembly, Tail rotor
PN Descrição Unidade
20-057-6-36 bolt 4
MS9482-12 washer, flat 8
AN970-6 washer 16
NAS6604-H8 bolt 4
206-016-201-133/137 blade assy, short, T/R 2
NAS1149F0463P washer 8
NAS1149F0432P washer 12
M45932/1-13L insert 4
206-010-460-001 seal 2
206-040-002-111 mast 1
Figure 62-11. Drive Link Assembly
PN Descrição Unidade
NAS1149F0563P washer 6
120-004C32E25 shim 2
MS14144L5 nut 2
Figure 62-10. Pitch Link Assembly
PN Descrição Unidade
206-010-360-003 link assy 2
Figure 63-09. Pylon Support, Transmission e Mount Isolation
PN Descrição Unidade
206-031-512-001 shim FWD 1
206-031-510-003 shim AFT 1
NAS6604H12 bolt 2
NAS1149D0463J washer 4
120-035-32-8 shim, laminated 4
206-031-505-005 shim 2
Figure 62-08. Hub Assembly, Main Rotor
PN Descrição Unidade
206-011-149-107 yoke 1
206-011-130-003 retainer assy 2
206-011-150-105 fitting assy 2
206-310-004-103 strap assy 2
206-011-118-001 bearing 1
206-310-005-101 bolt (pillow block) 1
Figure 62-03. Restraint Assembly
PN Descrição Unidade
206-011-116-001 Spring 2
Figure 62-02. Hub And Blade Assembly, Main Rotor
PN Descrição Unidade
206-010-200-145 blade assy, m/r standart (white) 2
M83461/1-115 packing 2
206-010-147-001 cap 2
206-001-020-029 tube 1
206-001-020-033 tube 1
206-001-021-009 tube 1
MS 17825-5 nut 16
20-057-5-45D bolt 2
20-057-4-24D bolt 1
206-001-568-001 bellcrank 1
AN174-14 bolt 1
MS17825-4 ou MS14144L4 nut 1
NAS1197-416 washer 2
NAS6604-32 bolt 3
206-076-031-107 servo atuador 1
206-001-194-005 tube 2
206-001-194-001 tube 1
206-001-099-001 tube 1
206-001-189-001 tube 1
20-057-5-17D bolt 3
AN960C516 washer 10
MS14144L5 ou MS17825-5 nut 9
AN960C516L washer 4
20-057-5-18D bolt 1
20-057-5-27D bolt 2
AN960PD616 ou AN960JD616 washer 2
20-057-5-16D bolt 2
206-001-020-029 tube 1
206-001-020-033 tube 1
206-001-021-009 tube 1
MS 17825-5 nut 16
20-057-5-45D bolt 2
20-057-4-24D bolt 1
206-001-568-001 bellcrank 1
AN174-14 bolt 1
MS17825-4 ou MS14144L4 nut 1
NAS1197-416 washer 2
NAS6604-32 bolt 3
206-076-031-107 servo atuador 1
206-001-194-005 tube 2
206-001-194-001 tube 1
206-001-099-001 tube 1
206-001-189-001 tube 1
20-057-5-18D bolt 1
20-057-5-17D bolt 3
AN960C516 washer 10
MS14144L5 ou MS17825-5 nut 12
AN960C516L washer 10
20-057-5-18D bolt 3
20-057-5-27D bolt 2
AN960PD616 ou AN960JD616 washer 2
20-057-5-16D bolt 2
Current date: 2014-10-12