Velocity This Velocity SE FG Basic Kit with the Fast Build Kit included will save you up to 800.



Item specifics
Make: Velocity
This Velocity SE FG Basic Kit with the Fast Build Kit included will save you up to 800 hours in build time. It is 50% finished, professional workmanship by a mechanical engineer, all FAA required docs & manuals provided. To buy both kits today from Velocity would cost $58,000.00. This sale includes both the Basic Velocity SE FG (fixed gear) & the Fast Build Kits for a 4-seat composite plane. See note below to read what Velocity does not include in these kits. BASIC VELOCITY SE FG (FIXED GEAR) KIT INCLUDES: Foam Cores: All foam cores are pre-cut, with level lines in place for proper alignment.WING CORES: (SE) 2 leading edge, 3 trailing edge; (XL) 3 leading edge, 4 trailing edgeCANARD CORES: (SE); (XL) 2 leading edge, 2 trailing edgeELEVATORS: 2AILERONS: 2Spar Sections: All spars are match-drilled, and have the bolt hole bushings already installed.MAIN WING SPAR: 2 pre-moldedCARRY-THROUGH (center section) SPAR: 1 pre-moldedCANARD SPAR: 1 pre-moldedFuel Strakes:2 upper/2 lower foam-cored vacuum bagged.Skins finished in white primerFuselage:UPPER HALF: Foam core vacuum bagged composite shell. White epoxy primed and pre-marked for all cutouts. Upper cowl attached.LOWER HALF: Foam core vacuum bagged composite shell. White epoxy primed and pre-marked for all cut-outs. Lower cowl attached.HardwareAN hardware: nuts, bolts, screws, washers, hinges, pulleys, and cables to complete airframeAll pre-machined parts for complete control, brake, trim, and door systems (no welding or machining necessary)Hinges for canard-elevator assembly. All Mil-spec hinges for ailerons, rudders and doorElectrical actuators and related parts for trimMaster cylinders, brake lines, and heavy duty brakes(SE) 2 - 15 x 6.00-6 low profile main tires/tubes 1 - 340 x 5.00 nose wheel tire/tube; (XL) 2 - 6.00 x 6, 6 ply tires and tubes, 1 - 5.00 x 5, 6 ply tire and tubeSeat hinges and front seat railsFiberglass cloth, epoxy resin, foam. Supply of application brushes, fillers, and mixing sticks2 extruded aluminum I-beam straightedges (wing/canard construction)Landing Gear:FIXED MAINS: 1 piece pre-molded S-fiberglassNOSE GEAR: 1-1/4” 4130 steel tube. Assembled with all hardware for installation into airframeMolded Parts: All Fiberglass pre-molded.(Fixed) wheel pants: 2 Mains / 1 Nose2-Air inlet scoops2-Main gear saddle4-Composite seat backs and headrests4-Composite seat bottoms1-Center keel2-Wiring ducts2-Canard tips1-Fuel sump tank / fuel sump tank cover1-Canard bulkhead1-Firewall1-Gear bulkhead1-Instrument panel1-Glare shield2-Lower winglet extensions4-Wing root ribs2-NACA engine cooling inlet scoops1-Landing light housing and lensWindows: Pre-formed. One piece 1/4” plexiglass windshield, 2 front door/2 rear 1/8" plexiglass windows. All glass is medium tint. FAST BUILD KIT INCLUDES FACTORY-BUILT: FASTBUILD WINGS & CANARD Winglets, wings, & canard completed, ailerons and elevators molded & all finished through primer, com and nav antennas installed. FASTBUILD FUSELAGE Factory installed bulkheads, firewall, conduit ducts, nose gear, main gear, axles, tires and tubes, windshield; all side windows installed; top and bottom fuselage halves permanently joined, glassed, and finished through primer; upper and lower cowling removed and flanged; gull wing doors aligned and installed with hardware installed and door flanging completed; carbon door beams installed; instrument panel fit and glassed for easy removal.Always warehouse stored since 2004 purchase, located in SoCal. Buyer responsible for shipping. NOTE: Sold as is. Kits are not sold separately - sale only includes Velocity Basic & Fast Build kits. Velocity does not include the following in their kits: engine, propeller, instrument panel, paint, interior materials, seat belts, aircraft lighting, antenna allowance. Current date: 2015-07-22