1977 Cessna : 182Q For Sale By: Private 1977 Cessna 182Q PROJECT Airplane!1977 182Q with only 1660.
Item specifics Condition: | Used | Year: | 1977 |
Make: | Cessna | Model: | 182Q |
For Sale By: | Private Seller |
1977 Cessna 182Q PROJECT Airplane!1977 182Q with only 1660 hours since new per log
book entry in 2004. Includes the data
plate and trim plate still attached (sn: 18265468), an FAA bill of sale, and
the logbooks I have (missing the first logbook). It is reported that at 264 hours it went to
Trinidad with a C of A. I have the flight record book from the time it
was in Trinidad. It returned to US in
1999 with 1302 hours, then had a windstorm incident while parked in around
2004. Airplane was parked and blew over
onto wings, tail, and nose. All of the
information given above is taken from existing logbooks, so I am not certifying that the info is
factual. It’s been stored both inside and outside since
the windstorm incident. A previous
owner began paint stripping paint and extensive disassembly. Some of the parts are missing, and other
damaged parts have been tossed. Nothing
forward of the firewall is included. Included is a tailcone (from rear window aft)
purchased from Wentworth. Corrosion is
bad around battery box and upper aft cabin top (battery spill?) Surface corrosion on skins, but I think they
could be acid etched and primed. (all of the installed clecos are rusted
solid). Previous owner began installing
the tailcone, then took it back off for storage. Possibly mating skins and some parts missing. Front and rear doorpost bulkheads and front
and rear spar carry throughs look undamaged.
Entire lower cabin structure looks good.
(Top main cabin skin destroyed by amateur removal crew with previous
owner). Entire cabin floor, main gearbox, nose gear tunnel (all lower
structure) looks undamaged. Includes main gear, wheels and brakes, (axle nuts
are not included), nose wheel assembly with axle and spacers. Master cylinders show steel rods corroded,
but move freely, may clean up; No avionics. Interior pretty much complete,
dirty, but not torn. One door appears
straight and one is bent, both included with interior door panels. Includes real factory POH, not the cheap
information manual.
This aircraft is being sold as a project, there are many usable parts either for this project or other Cessna 182"s that have interchangeable parts,
Door frames right and left, landing gear box, seats, ailerons, ribs, many frame components, flight controls and usable parts.
There is also a full sets of books, data plates and records are intact for those who want a project airplane.
The price is very reasonable and buyer must pick it up.
Ask for phone and you may call with questions.
On Mar-16-20 at 14:25:17 PDT, seller added the following information:
Current date: 2020-03-19