AgustaWestland 1990 1990 AGUSTA A109C Serial# 7634 Reg# TBD Location Ogden, Utah CB Aviation proudly.



Item specifics
Condition: Used Make: AgustaWestland
Model Year: 1990
1990 AGUSTA A109C Serial# 7634 / Reg# TBD / Location Ogden, Utah CB Aviation proudly brings to market this 1990 Agusta A109C! Exceptionally maintained and equipped, with immaculate interior and exterior, 7 seated Helicopter, VIP Configuration with white leather, newer paint and is available for immediate sale. This Helicopter is currently relocating to Ogden, Utah and will be put on the U.S. Registry. Helicopter flight hours – 2032 h Engine No. 1 – Rolls-Royce 250-C20R/1 (s/n CAE 295584) Engine No. 2 – Rolls-Royce 250-C20R/1 (s/n CAE 295585) Flight hours and cycles of engine No. 1 – 2032 h, 3494 cycles Flight hours and cycles of engine No. 2 – 2032 h, 3481 cycles Asking price $775,000.00 Performances: • Passengers: 7 • Maximum Gross weight MGW (kg): 2720 • Usable fuel (litres): 700 • Max distance (km): 700 • Rate of climb (m/sec): 20 • Maximum speed (km/h): 310 • Cruise speed (km/h): 260 • Maximum height (m): 4750 Specifications: • NAV1/NAV2 Navigation System: Collins VIR-32 with Controller Collins CTL-32 • ADF Automatic direct finder: Collins ADF-60A with Contr Collins CTL-62 • Gyro: Honeywell C14A • EHSI: Collins EHSI EFD-4 • DME distance measure eq.: Collins DME 42 with Indicator Collins Ind-42 • Transponder: Collins TDM 90 with Controller Ind 3 1C • Radaraltimeter: Honeywell RT300 • ADI: Pilot+Copilot+standby Honeywell • GPS: Garmin 165 Additional Equipment: · Traffic advisory system (TAS 610) · Weather radar RDR 2000 · DVD + Aero show · Bose A20 Headset
Exterior: · 2011 paint – green & silver with a gold stripe Interior: · VIP Configuration · Seven (7) total seats, all in white leather completely refurbished in 2011 Maintenance: · Helicopter is on the maintenance of the Italian company Eurotech Srl on the basis of a contract for maintenance from 08/11/2011. Eurotech Srl is an established sales service center for Agusta helicopter, both in Europe and in Ukraine. Official site: here · Main Inspection – o During the annual inspection (05/09/2015) were changed torsion bars of tail rotor, fuel pump and fuel pump pressure switch, scissor sleeve of swashplate, tail rotor pitch change links, were carried out all the necessary service bulletins and periodic inspection according to the Maintenance program of the helicopter. o During the operation of the helicopter were changed different components, namely an inclined tail rotor drive shaft, pitch change links of the MR, hydraulic pumps, all landing gear bolts, the bolts of the tail boom to the fuselage. o Repair of the fuel power governor of engine has been made, FCU, turbine of the engines, compressors repairing, as well as bulletins made to improve the performance of the compressor and turbine. Main Components status: Component Retirement life, h Life component, h Residue, h Main rotor blades (4) 25000 1908:45 1851:50 1685:30 1685:30 23091:15 23148:10 23314:30 23314:30 Tail rotor blades (2) 3000 1012:00 1012:00 1998:00 1998:00 Main rotor retention strap (4) 5000h/96m 382:00 382:00 382:00 382:00 4618:00/11.05.20 4618:00/11.05.20 4618:00/11.05.20 4618:00/11.05.20 Main rotor hub assy 4200 2029:00 2171:00 Main transmission assy 4800 2029:00 2771:00 Tail rotor gearbox 3600 644:32 2955:28 Tail rotor hub 4800 2029:00 2771:00 Engine turbines – overhaul on 1647 h Engine = 1 compressor repairing on 1647 h. Engines = 2 compressor repairing on 1824 h Contact: Cory Bengtzen President CB Aviation – CB Jet Center 888-453-8332 office 801-860-9762 mobile 866-422-9850 efax here Current date: 2016-08-10