“Disassembled, stripped paint, and cleaned. Visually anddimensionally inspected. Found door attach.



Item specifics Condition: Seller Notes:
Used
“Disassembled, stripped paint, and cleaned. Visually anddimensionally inspected. Found door attach plate, racebearing, washer bearing, locating pin, jack link corroded.Found link assembly out of dim. Found upper arm worn.Complied with NDT. Found lower arm cracked. No other cracksor defects noted. Reinstalled repaired jack link. Replacedupper arm, lower arm, link assembly, door attach plate, racebearing, washer bearing, locating pin and all otherapplicable parts with new. Painted, reassembled, appliedsealant, set clearances, and safetied. Overhaul complete inaccordance with Hawker-Beechcraft 800 XP CMM Revision 31dated June 2011. Final inspected.Modifications and service bulletins complied with at thisoverhaul: Complied with SB 32-3962 LANDING GEAR COMPONENTREPLACEMENT FOR HYDROGEN EMBRITTLEMENT, 200-HOUR REQUIREMENTrevision 3, dated February 2012. Complied with SB 32-3696HAWKER 800XP/l000 MAIN LANDING GEAR (MLG) UPPER/LOWER ARMAND SIDESTAY ASSEMBLY RE-IDENTIFICATION dat”
Make: Beechcraft Model Year: 800XP
Disassembled, stripped paint, and cleaned. Visually and dimensionally inspected. Found door attach plate, race bearing, washer bearing, locating pin, jack link corroded. Found link assembly out of dim. Found upper arm worn. Complied with NDT. Found lower arm cracked. No other cracks or defects noted. Reinstalled repaired jack link. Replaced upper arm, lower arm, link assembly, door attach plate, race bearing, washer bearing, locating pin and all other applicable parts with new. Painted, reassembled, applied sealant, set clearances, and safetied. Overhaul complete in accordance with Hawker-Beechcraft 800 XP CMM Revision 31 dated June 2011. Final inspected. Modifications and service bulletins complied with at this overhaul: Complied with SB 32-3962 LANDING GEAR COMPONENT REPLACEMENT FOR HYDROGEN EMBRITTLEMENT, 200-HOUR REQUIREMENT revision 3, dated February 2012. Complied with SB 32-3696 HAWKER 800XP/l000 MAIN LANDING GEAR (MLG) UPPER/LOWER ARM AND SIDESTAY ASSEMBLY RE-IDENTIFICATION dated July 2005 and SB 32-3979 LANDING GEAR COMPONENT REPLACEMENT FOR HYDROGEN EMBRITTLEMENT, 800-HOUR REQUIREMENT dated February 2010. Complied with Mod 25G295A from SB 32-3779 SIDE STAY ASSEMBLY LOWER ARM GREASE FITTING REINTRODUCTION dated July 2006. Compliance with the listed modifications and service bulletins changes the part number to 140-810043-11 in accordance with engineering drawing 140-810043 revision 7 dated 06/28/2006. CSN: 2828 ALL LIFE LIMITED PARTS ARE LISTED ON PROVIDED LIFE LIMIT LOG Current date: 2016-07-06