This is a kit I bought a number of years ago and have too
many projects. The fuselage is basically.
Item specifics This is a kit I bought a number of years ago and have too
many projects. The fuselage is basically complete with a view trim and
side panels to install. Three of the wings ( 2 tops and the left lower
wing ) are complete. On the lower left wing is complete the right wing
you would need to finish one rib complete the aileron and install the leading
edge. You will also get a new nose bowl and N braces. I have the
complete plans and a number of other parts, including extra wood, and the rods
to connect the ailerons. All of the controls sticks and control linkage,
rudders and brakes have been installed. I would say that it is about 85
to 90% is complete. From what I have heard from others is a great plane to fly. The current kit
price for this plane exceeds 22K
Wingspan 23’
Wing Area 170 sq. ft.
Height 7’4”
Length 19’
Seats 2/Tandem
Range (12 gal fuel tank) 200 mi.
Design Loads +6 -3g
Engine (used for data) Norton AE 100R
Horsepower 75-100 hp
Gross Weight 1,150 lbs.
Empty Weight 560 lbs.
Cockpit Width 26”
Service Ceiling 10,000
Engine Weight 180-20
Velocity-Never Exceed 110 mph
Cruise Speed 90 mph
Stall Speed 35 mph
Climb Rate 800-1000 fpm
Takeoff Run 300’
Landing Roll 400’
If you have any questions let me know Current date: 2017-03-19
