“UPDATED BENSEN, KEN BROCK, GYROCOPTER ROTAX 503 RESTORED & MADE SAFER FLAT BLACK. 11FT. ROTOR.
Item specifics
Used |
“UPDATED BENSEN, KEN BROCK, GYROCOPTER ROTAX 503 RESTORED & MADE SAFER FLAT BLACK. 11FT. ROTOR BLADES, ALMOST ALL ORGINAL THE FRAME ,ROTOR BLADES, CONTROL SYSTEM, THIS GYRO HAD BEEN STRIPPED DOWN (LEAVING THE MOTOR) ALOMOST ALL BOLTS HAVE BEEN REPLACES. WARP DRIVE FIBER GLASS PUSHER PROP., I HAVE TAKEN THE CARB'S OFF AND CLEANED THEM OUT,PAINED FLAT BLACK AND ALSO HIGN TEMP FLAT BLACK ON PARTS THAT PRODUCE HEAT, NEW ITEMS, 3mm CONTROL CABLES, FORCED AIR MPH GAUGE DIGITAL RPM GAUGE THAT STILL NEEDS HOOKED UP, IT DOES HAVE AN ELECTRIC STARTER HOWEVER THE SOLENOID NEEDS REPLACED GYRO DOES INCLUDE TRAILER THAT I'M STILL WORKING ON BUT WILL BE DONE SOON. NEXT IS A LIST THE GYRO INCLUDE.Four point harness12 Volt & 2 USB Charging, CarbonFiber reinforcement, MPH Gauge,RPM Gauge (Engine)RPM Gauge,Rotor RPM, Fuel Gauge, Side mounted throttle, Control Stick Grip, 3mm Control Cable,FRONT BRAKE, Electric Start, Kill Switch, 3 Blade Pusher Prop. 11ft Aluminum Rotors(2)L.E.D. MarkeR LIGHTS,” |
ORGINAL LISTINGThis is an original Bensen frame, rotor blades, rotor hub and possibly tail rudder. It has been updated with almost all new hardware, Rotax 503 dual carb, B gearbox, air cooled, 2 stroke, Warp Drive Prop. 3 blade 57 inch fiber glass propeller, fuel tank seat, l.e.d. marker lights, ultralight wheels, reinforced w/ carbon fiber in several places, 2 usb plug-ins, 12v plug-in, vacuum mph gauge, kill switch, *electric start, front push friction brake, 3mm control cables, Cessna alum. pedals, 4 point harness, digital r.p.m. gauge, fuel primer, inline fuel filter, new NGK spark plugs, new lithium battery (2lb 4oz). It has been stripped down, inspected then repainted. (motor was not removed) The boom, mast and axel have been reinforced where they meet, under the Gyro, (aluminum support welded by factory). Rotors are 11ft w/ 2ft hub. Meets FAA part 103 as an ultralight No License Required I also have a trailer that was/is being modified to transport it, which is included. I have put local pick-up only, but depending on your location I may be able to meet. It does need a new choke cable but I"ve never needed to use it, starts very quickly. Ready to fly.I"m taking different pictures today to post, I am also working on a YouTube channel so i can post more videos. I could send more pictures as requested. Items it does need; a new, choke cable 35$, single dual carb air filter (50$, starting Soleniod (25$), tooggle switch (6$) for electric start, however you can start it by just turning the prop by hand. CARBS HAVE BEEN REMOVED CLEANED Thanks
If you need Gyrocopter PARTS PLEASE CONTACT ME
Current date: 2016-10-09